Storing the Probes After Sampling
Returning to the Lab:
Upon returning to the lab, the probes must be properly stored in order to maintain them. Rinse each probe with distilled water and store each probe in the "long term storage" bottle designated for use with each particular probe. Make sure that the probes are not touching the damp sponge on the bottom of the bottle. Rinse each of the "short term storage" bottles and put all of the materials (short term storage bottle, long term storage bottle, probe, and information booklet) back in their appropriate storage boxes.
Developed by Emily Blackwell with assistance from Dr. Mark Lassiter
This procedure is a modified version of the procedures for
:
| Vernier LabPro Probes | Extech Economy Oyster pH Meter Kit |
| Vernier Software & Technology | Extech Instruments Corporation |
| 13979 S.W. Millikan Way | 335 Bear Hill Road |
| Beaverton, OR 97005-2886 | Waltham, MA 02154 |
| www.vernier.com | Fax: (617) 890-7864 |
Site prepared by Mark Lassiter, 1/23/2002